MasterCAN V-GATE. CAN and J1708 Buses Vehicle Data Interface 2017-08-25T14:18:12+00:00

MasterCAN V-GATE. CAN and J1708 Buses Vehicle Data Interface    

Buy online MasterCAN V-gate

  • Reading data from CAN and J1708 vehicle buses
  • Processing and preparation of data on the vehicle operation parameters for vehicle telematics systems
  • Generating and sending reports to output interfaces:
    • to CAN using J1939 protocol in the form of FMS и Telematics messages
    • to RS-232 using ASCII protocol in the form of text messages or using Modbus protocol
  • s6_telematic_inerface-compatible, receiving data from up to 8 DUT-E CAN fuel level sensors, calculation and provision of data on the total fuel volume in several fuel tanks using DUT-E COM protocol
  • Supplied with contactless reader 
  • Power supply directly from the vehicle electrical circuit

Application


MasterCAN V-GATE is used in vehicle telematics systems to receive parameters of the vehicle operation from CAN and J1708 onboard buses. It is suitable for any type of vehicles (trucks, buses, agricultural machinery) where J1708 and/or CAN buses are used, e.g. vehicles manufactured by Volvo, Freightliner, Cummins. MasterCAN V-GATE acts as FMS gateway. 

A telematics tracking device with CAN or RS-232 input interfaces may be used to receive data. For more details regarding the interface adjustment, the protocol used and the contents of the transmitted data please see the MasterCAN operation manual.

There are several options to connect MasterCAN V-GATE to operate as a part of a telematics system. The basic options are provided below:

Option 1. Receiving data from CAN bus
V-GATE can be connected to CAN bus either using CANCrocodile contactless reader (recommended), or by direct contact. V-GATE automatically sends generated Telematics and FMS messages to the output CAN. In RS-232, text messages based on ASCII protocol are sent at a one second interval or messages based on Modbus protocol are sent in the request-response mode.

Option 2. Receiving data from J1708 bus

V-GATE can be connected to J1708 bus either using 1708Crocodile contactless reader (recommended method), or by direct contact. V-GATE automatically sends generated Telematics messages to the output CAN. In RS-232, text messages based on ASCII protocol are sent at a one second interval or messages based on Modbus protocol are sent in the request-response mode.

Option 3. Simultaneous reception of data from J1708 and CAN buses

V-GATE can be connected to both buses either using contactless readers (recommended method), or by direct contact. V-GATE automatically sends generated Telematics and FMS messages to the output CAN. In RS-232, text messages based on ASCII protocol are sent at a one second interval or messages based on Modbus protocol are sent in the request-response mode.

Option 4. Summation of data from several DUT-E CAN fuel level sensors

MasterCAN V-GATE can be used for summation of data on the fuel volume in several tanks. It supports up to 8 tanks with DUT-E CAN fuel level sensors installed in them.

 

Warranty

5 years from the date of manufacturing.

Useful Links